The MBS Colt 90X is an entry level recreational mountainboard that comes fully assembled and fitted with a brake system.
What’s new?
This year’s Colt 90X has undergone more improvements than ever before. By upgrading its tyres to genuine MBS T1 tyres with specially formulated high-rebound rubber material MBS has made this year’s Colt 90 more than twice as fast as last year’s, and by upgrading the Colt 90’s tube material to high-grade butyl rubber we’ve reduced air loss and flats to little more than a memory. Other wheel improvements include genuine MBS rubber-shielded 12x28mm bearings and MBS’ brand new Rockstar II hubs. Finally, to prove we are serious about allowing this board to be pushed harder than ever before we also upgraded its ATS axles from 9.5 to 12mm to match the diameter of the Matrix axles. In addition to the obvious performance enhancements these upgrades offer they have made the Colt 90X more compatible with the rest of the MBS line so the choice to one day upgrade your hubs or trucks is as simple as that. We’ve replaced compatibility charts with compatibility.
Components
- Deck – Colt 90 (Constellation)
- Trucks – ATS.12
- Bindings – F1
- Tyres – T1
- Hubs – Rockstar II
- Bearing – 12x28mm
Specification
- Part Description – Colt 90X
- Rider Style – Learning to Mountainboard and Kiteboard
- Overall Weight – 6.6 (kg) / 14.6 (lb)
- Overall Length – 105.2 (c) / 41.4 (in)
- Axle to Axle Length – 85.2 (c) / 33.5 (in)
- Deck Construction – Maple Deck
- Stiffness – Stiff
- Graphic Material – Maple
- Grip Tape – 46 Grit – Alum. Oxide
- Deck Tip Angle – 20
- Deck Length – 90.2 (c) / 35.5 (in)
- Deck Width – 22.0 (c) / 8.7 (in)
- Deck Weight – 1.9 (kg) / 4.2 (lb)
- Truck Type – ATS. 12
- Truck Material – Die-Cast Alum. Hanger and Base; Cromoly axle
- King Pin – CrMo
- Suspension – Orange Bushing
- Axle Width – 40.0 (c) / 15.8 (in)
- Axle Diameter – 12mm (Solid)
- Hub Type – Rockstar II
- Color – Black
- Accepts Bearing Size (OD) – 28mm
- Bearing – 12x28mm
- Tyre Type – T1 (8″) – 200×50
- Tyre Color – Black
- Binding Type – F1
- Hardware Type – Black Zinc / Nickel
- Grab Handle – Drilling Required
- Brake Compatible – Yes
- Brake Included? – Yes
- Assembly – Wheels Off Component Pack
- Overall Length with Matrix – 114.4 (c)
- Overall Length with Vector – 109.1 (c)
- Overall Length with ATS – 108.7 (c)
